TPR DC regulated is high precision and high reliability constant voltage, constant current power supply, it have current-limiting, voltage reduction, short circuit protection over temperature protection, strong load ability characteristic.TPR series power supplies are applicable to laboratory, electronic items production line, telecommunication equipment maintenance, they are necessary device for technology and research, production, teaching institution. http://bit.ly/2xeGQNW
Flip type panel protection to prevent misoperation
Power supply appears overheating operation status, output will be closed.
When machine internal temperature recovery normal, power supply output recoveries default condition
Specifications：
TPR3003T 3A
TPR3005T 5A
Input voltage：
220V±10%,50Hz/60Hz
220V±10%,50Hz/60Hz
Rated output voltage：
0~30V
0~30V
Rated output current：
0~3A
0~5A
Rated output power：
90W
150W
Voltage：
Power supply effect：
CV≤0.01%+3mV
CV≤0.01%+3mV
Voltmeter display precision：
±(0.5% of rdng+2digits)
±(0.5% of rdng+2digits)
Load effect：
CV≤0.01%+5mV
CV≤0.01%+7mV
Ripple and noise：
(5Hz~1MHz)CV≤0.5mVrms
(5Hz~1MHz)CV≤1mVrms
Current：
Power supply effect：
CC≤0.2%+1mA
CC≤0.2%+1mA
Ammeter display precision：
±(0.5% of rdng+2digits)
±(0.5% of rdng+2digits)
Load effect：
CC≤0.2%+5mA
CC≤0.2%+7mA
Ripple and noise：
(5Hz~1MHz) CC≤3mArms
(5Hz~1MHz)CC≤5mArms
Protection method：
current-limiting, voltage reduction, short-circuit protection, over temperature protection , over voltage protection
TPR DC regulated is high precision and high reliability constant voltage, constant current power supply, it have current-limiting, voltage reduction, short circuit protection over temperature protection, strong load ability characteristic.TPR series power supplies are applicable to laboratory, electronic items production line, telecommunication equipment maintenance, they are necessary device for technology and research, production, teaching institution.
Flip type panel protection to prevent misoperation
Power supply appears overheating operation status, output will be closed.
When machine internal temperature recovery normal, power supply output recoveries default condition
Specifications：
TPR3003T 3A
TPR3005T 5A
Input voltage：
220V±10%,50Hz/60Hz
220V±10%,50Hz/60Hz
Rated output voltage：
0~30V
0~30V
Rated output current：
0~3A
0~5A
Rated output power：
90W
150W
Voltage：
Power supply effect：
CV≤0.01%+3mV
CV≤0.01%+3mV
Voltmeter display precision：
±(0.5% of rdng+2digits)
±(0.5% of rdng+2digits)
Load effect：
CV≤0.01%+5mV
CV≤0.01%+7mV
Ripple and noise：
(5Hz~1MHz)CV≤0.5mVrms
(5Hz~1MHz)CV≤1mVrms
Current：
Power supply effect：
CC≤0.2%+1mA
CC≤0.2%+1mA
Ammeter display precision：
±(0.5% of rdng+2digits)
±(0.5% of rdng+2digits)
Load effect：
CC≤0.2%+5mA
CC≤0.2%+7mA
Ripple and noise：
(5Hz~1MHz) CC≤3mArms
(5Hz~1MHz)CC≤5mArms
Protection method：
current-limiting, voltage reduction, short-circuit protection, over temperature protection , over voltage protection
● High quality four-core wire heater
● Smart recognition of working or non-working status.
● Automatic standby, shutdown with smart time setting.
● Temperature locking.
● Beep alarm function available.
● Temperature read out in ℃ and ℉
● MCU controlled temperature calibration.
● Simulate bar indicating heating up status.
● User-friendly menu enables system setting easier.
● Separate iron stand to save room and to make easier deposit.
● New design with LCD display screen making control visualization.
● Buttons(1,2,3) for pre-setting or switching frequently used temperature.
● Low-voltage heater separated from power supply to keep soldering work safer.
● Soldering tip designed separate from heater and using
● Exchangeable 900M series to save use-cost. http://bit.ly/2xeGQNW
High performance four-core wire PTC ceramic heater Temperature in ℃ and ℉ Temperature up to 500℃ making it versatile Manual temperature calibration by knob controlling High efficiency of heating to reduce energy consumption. Heat and fire resistant material handle set with light, slender and ergonomic design. Soldering tip designed separate from heater and using exchangeable 900M series to save use-cost. Grounded 3 core power cord and ESD safe design to minimize damage to user and sensitive electronic
this video can teach you how to change Replace the Heating elements for Atten soldering station,
it is easy to learn how to do,
i am glad to helo you.
thanks
more products information,please visit www.atten.com
●High accuracy MCU control is employed to synchronously detect whether the 3 tool channels can be used independently and synchronously without matual interference.
●Built-in vacuum generator.
●Super power.The whole machine can provide a maximum of 900W power output.
●Stand-alone machine can carry out multiple desoldering tasks simultaneously.
●Large screen graphics display screen which can display all kinds of parameter data and messages graphically.
●The contents can be presented abundantly
●Automatically identify all kinds of welding tools and load corresponding parameters.
●The software can adjust the temperature automatically which is more accurate and convenient.
●Fault display and alarm functions available.
●Functions such as standby,buzzer ringing,temperature lock and factory data reset available.
●Support communication interface.It can access to a computor,and complete various settings following the specified program. http://bit.ly/2xeGQNW
●Vacuum desoldering pen is added to facilitate dismantle the desoldering components.
Detailed Images
Hot Air Station
●Intellignet cooling system is adopted.It can automatically delay the air supply when the equipment is shutdown which can greatly extend the service life of the heating core and holder.
●Sprial heating core is adopted which can contribute to longer service life.
●The holder of hot air gun has been redesigned to make the air more even.It is not easy to damage which is convenient for maintenance,storage and transportation.
●The soldring station adopts split type heating core material which provides thermal conduction and extremely high temperature returning speed.It only needs 10 seconds from room temperature to 350℃ when the machine is started up to 350℃.
●Front sensor is adopted to ensure high temperature control accuracy and good temperature stability.
●The soldering iron handle holder is light and comfortable.
Desoldering Station
●The heating core of desoldering station adopts 24VDC low-voltage power supply and the main power transformer isolation output which is safe and reliable.
●Built-in vacuum pumpwith strong suction.
Electronic Tweezers:
●The heating core of electronic tweezers adopts 12VDC low-voltage power supply and the main power transformer isolation output which is safe and reliable.
Front sensor is adopted to ensure high temperature control accuracy and good temperature stability.
