AT938D 60W Digital & Lead-free Soldering Station

Temperature read out in ℃ and ℉
On/Off switch on the right side of the unit.
MCU controlled temperature calibration.
Simulate bar indicating heating up status.
LCD display screen making control visualization.
User-friendly menu enables system setting easier.
Separate iron stand to save room and to make easier deposit.
Buttons (1, 2, 3) for pre-setting or switching frequently used temperature.
Low-voltage heater separated from power supply to keep soldering work safer.
Soldering tip designed separate from heater and using exchangeable 900M series to save use-cost.

soldering gun station

soldering gun

http://www.atten.com/products/at938d-60w--digital-lead-free-soldering-station.html

Specifications:	Packing list:	Standard Packing:
Voltage: AC (100V/110V/120V||220V/230V/240V) 50/60Hz(Optional)	Main Unit: 1 Unit	Inner box: 25x21x13.4(cm)
Power：60W	Handle set : 1 PCS	N.W.: 1.79kg
Heater Voltage：24VAC	Iron stand: 1 PCS	G.W.: 2.03kg
Temperature range：150~450°C	AC cord: 1 PCS	Carton: 12 PCS/Carton
Temperature offset range：±50°C	Manual: 1 Copy	Size: 51.5x44x43(cm)
Temperature stability：±2°C (in still air, no load)	Cleaning sponge: 1 PCS	N.W.: 24.4kg
Setting method：adjust by buttons		G.W.: 25.6kg
Temperature calibration：digital
Heater：60W dual-core ceramic heater
Tip-to-ground impedance：< 2Ω
Tip-to-ground voltage：< 2mV

Atten AT937 50W CNC Soldering Station

MCU controlled temperature calibration with PID system equipped.
Imported heat-resistant materials heater with long life.
The heater using low voltage AC source to ensure the antistatic and no leakage, no interference.
Steady temperature setting with 200～480℃.
Rapid heating-up.
Legerity handle suitable for long time operation.
Unique temperature locks setting to avoid adjusting temperature.
Using split design, easy to place.
source from:

http://www.atten.com/products/atten-at937-50w-cnc-soldering-station.html

Specifications:	Packing list:	Standard Packing:
Voltage: AC (100V/110V/120V||220V/230V/240V) 50/60Hz(Optional)	Main Unit: 1 Unit	Inner box: 26.5x23x16(cm)
Power：50W	Handle set : 1 PCS	N.W.: 1.6kg
Temperature range：200~480°C	Iron stand: 1 PCS	G.W.: 1.78kg
Temperature stability：±2℃ (in still air, no load)	AC cord: 1 PCS	Carton: 12 PCS/Carton
Setting Manner：knob control	Manual: 1 Copy	Size: 55x48x50.5(cm)
Heater：Four core stainless steel heater	Cleaning sponge: 1 PCS	N.W.: 19.2kg
Tip-to-ground impedance：< 2Ω		G.W.: 21.4kg

Atten ST-80 80W Soldering Station for cellphone repair

● High quality four-core wire heater
● Smart recognition of working or non-working status.
● Automatic standby, shutdown with smart time setting.
● Temperature locking.
● Beep alarm function available.
● Temperature read out in ℃ and ℉
● MCU controlled temperature calibration.
● Simulate bar indicating heating up status.
● User-friendly menu enables system setting easier.
● Separate iron stand to save room and to make easier deposit.
● New design with LCD display screen making control visualization.
● Buttons(1,2,3) for pre-setting or switching frequently used temperature.
● Low-voltage heater separated from power supply to keep soldering work safer.
● Soldering tip designed separate from heater and using
● Exchangeable 900M series to save use-cost.

hot  air station, hot air gun

http://www.atten.com/products/atten-st-80-80w-soldering-station.html

Specifications:
Package list:
Standard Packing:

Voltage: AC (100V/110V/120V||220V/230V/240V) 50/60Hz(Optional)
Main Unit: 1 Unit
Inner box: 31.5x27x15.2(cm)
Power：80W
Handle set : 1 PCS
N.W.: 2.58kg
Heater voltage：28VAC
Iron stand: 1 PCS
G.W.: 2.81kg
Temperature range：150~480°C
AC cord: 1 PCS
Carton: 6 PCS/Carton
Temperature offset range：±50°C
Manual: 1 Copy
Size: 55.5x33x48(cm)
Temperature stability：±2°C (in still air, no load)
Cleaning sponge: 1 PCS
N.W.: 16.9kg
Temperature adjustment：5 digits (Default)/1 digit (Fine-tuning)
 
G.W.: 18.0kg
Automatic stand-by time：1-120 minutes （Adjustable）
 
 
Automatic shutdown time：1-120 minutes （Adjustable）
 
 
Heater：80W High quality four-core wire heater
 
 
Tip-to-ground impedance：< 2Ω
 
 
Tip-to-ground voltage：< 2mV

Atten ST-100 100W Soldering Station

● Smart recognition of working or non-working status.
● Automatic standby, shutdown with smart time setting.
● High quality silver alloy heater to achieve quicker heating-up
● Temperature locking.
● Beep alarm function available.
● Temperature read out in ℃ and ℉
● MCU controlled temperature calibration.
● Simulate bar indicating heating up status.
● User-friendly menu enables system setting easier.
● Separate iron stand to save room and to make easier deposit.
● New design with LCD display screen making control visualization.
● Buttons(1,2,3) for pre-setting or switching frequently used temperature.
● Low-voltage heater separated from power supply to keep soldering work safer.
● Soldering tip designed separate from heater and using 
● Exchangeable AT800 series to save use-cost.

http://www.atten.com/products/atten-st-100-100w-soldering-station.html

Atten Atten ST-80 80W Soldering Station

● High quality four-core wire heater
● Smart recognition of working or non-working status.
● Automatic standby, shutdown with smart time setting.
● Temperature locking.
● Beep alarm function available.
● Temperature read out in ℃ and ℉
● MCU controlled temperature calibration.
● Simulate bar indicating heating up status.
● User-friendly menu enables system setting easier.
● Separate iron stand to save room and to make easier deposit.
● New design with LCD display screen making control visualization.
● Buttons(1,2,3) for pre-setting or switching frequently used temperature.
● Low-voltage heater separated from power supply to keep soldering work safer.
● Soldering tip designed separate from heater and using

soudering gun  soldering station
● Exchangeable 900M series to save use-cost.

http://www.atten.com/products/atten-st-80-80w-soldering-station.html

Specifications:
Package list:
Standard Packing:

Voltage: AC (100V/110V/120V||220V/230V/240V) 50/60Hz(Optional)
Main Unit: 1 Unit
Inner box: 31.5x27x15.2(cm)
Power：80W
Handle set : 1 PCS
N.W.: 2.58kg
Heater voltage：28VAC
Iron stand: 1 PCS
G.W.: 2.81kg
Temperature range：150~480°C
AC cord: 1 PCS
Carton: 6 PCS/Carton
Temperature offset range：±50°C
Manual: 1 Copy
Size: 55.5x33x48(cm)
Temperature stability：±2°C (in still air, no load)
Cleaning sponge: 1 PCS
N.W.: 16.9kg
Temperature adjustment：5 digits (Default)/1 digit (Fine-tuning)
 
G.W.: 18.0kg
Automatic stand-by time：1-120 minutes （Adjustable）
 
 
Automatic shutdown time：1-120 minutes （Adjustable）
 
 
Heater：80W High quality four-core wire heater
 
 
Tip-to-ground impedance：< 2Ω
 
 
Tip-to-ground voltage：< 2mV

AT852D Hot Air Rework Station

●Closed-loop and MCU zero crossing design for achieving fast heating-up, accurate and stable control.
●Knob control and LED display make work easy.
●High power diaphragm pump with high pressure make it suitable for various nozzles.
●Patented heater for obtaining fast heating-up and extending lifespan.
●Intelligence cooling system and deferred power-off function to extend hand piece lifespan

http://www.atten.com/products/atten-at852d-hot-air-rework-station.html

Specifications：
Packing list:
Standard Packing:

Voltage：AC (100V/110V/120V||220V/230V/240V) 50/60Hz(Optional)
Main Unit: 1 Unit
Inner box : 33x27.2x19.5(cm)
Power：550W
Nozzles: 2 PCS
N.W.: 3.8kg
Temperature range：100~480°C
Gun Holder: 1 PCS
G.W.: 4.2kg
Maximum Air Flow：23L /min
AC Cord: 1 PCS
Carton: 6 PCS/Carton
Air flow grades：A25-A99
Manual: 1 PCS
Size: 56x35x61.5(cm)
Pump：diaphragm pump
 
N.W.: 22.5kg
Noise：＜52dB(A)
 
G.W.: 23.8kg
Working Temperature：0℃～40℃

Atten GT-6200 Double Channel Rework Station for cellphone repair

• Highly compatible features, compatible with various type of soldering tools, a machine serves several purposes.
• Single channel power max support to 150W, whole machine power max support to 200W.
• Two output channels can work at the same time.
• Big silicone buttons operate comfortable and reliable.
• All kinds of parameter data and information in the form of graphics display with its large graphic display.
• Can automatically recognize the soldering tools that you connected and upload the corresponding parameters.
• Provide quick three groups preset temperature parameters to simplify operations.

source from:

http://www.atten.com/products/gt-6200-double-channel-rework-station.html

Specifications:	Packing list:	Standard Packing:
Voltage：AC 230V±10% 50Hz	GT-6200 Main Unit: 1 Set	Inner box: 32x6x5(cm)
Power： 200W（Max）	GT-6200 Main Unit: 1 Unit	N.W.: 0.27kg
Temperature range：150℃ ~ 480℃/ 302℉ ~ 896℉	Manual: 1 PCS	G.W.: 0.35kg
Stand-by mode: Support	AC cord: 1 PCS	Carton: 30PCS/Carton
Auto-sleep mode: Support	3.5mm grounding-type receptacle: 1 PCS	Size:32.7x31.7x33.3(cm)
Shortcut temperature: 3 groups temperatures can adjust and use quickly		N.W.: 8.1kg
Optional accessories：GT- Y050，GT- Y130，GT- Y150，GT- N100	GT-Y130 Soldering iron: 1 Set	G.W.: 9kg
	GT-Y130 Soldering iron: 1 PCS
	GT-S01 Iron stand: 1 PCS
	GT-N100 Hot Tweezers: 1 Set
	GT-N100 Hot Tweezer: 1 PCS
	GT-S02 Twezzers holder: 1 PCS